Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.2273017
- Product Categories
- Friendly Links
Information Name: | Shrink band |
Published: | 2012-03-16 |
Validity: | 1000 |
Specifications: | 12 |
Quantity: | 1.00 |
Price Description: | 0 |
Detailed Product Description: | Qingdao Xin source of pipeline corrosion insulation United Engineering Co., Ltd. imported the production quality of the product olefin base material as a carrier material by a variety of formulations and radiation crosslinking process made use of the shrinking sets of specifications (with), widely used in the oil, natural gas (gas), communications, heat pipes, to the, drain line interface corrosion, leakage and protection projects, with high mechanical strength, anti-aging capability, good sealing performance, corrosion resistance, easy construction and other key advantages, the quality indicators in line with SY / T 4054, 0415, 0413 "Radiation crosslinked polyethylene heat shrinkable band (set)" countries. Industry standards, Cross-linked heat shrinkable band (set) products, according to standards of its inner layer is coated with different specifications of the dedicated hot sol of different thickness, adapted to coal tar, asphalt, 2PE, 3PE, 3PP, modified rubber, epoxy coating The anticorrosion mouth, the different uses for the project, with a variety of specifications of specific products, divided into anticorrosion mouth, interface fixed type, type of water seepage, rust-protected and other types of customers, according to engineering requirements were selected. Construction process planning 1. Before construction, should be prepared to cut knife, torch or dedicated liquefied petroleum gas bottles in the baking, spray gun, wiped the cloth, and mats flat tube, fitted with thermal units, on a good interface. 2. Fill the mouth with a cloth wipe impurities, dust, will be transferred to bluish flame gun fire about 1200 ℃. 3. Weihuo first dry docking surface water pipe, so that the surface to about 40-50 ℃. 4. To move the joints shrink sleeve on the positive, along the diameter of the gun with two sets of docking in the joints from weeks to bake until the week after the shrink package Yan, and peripheral do baking, thus shrinking into discharge of accumulated air time to ensure that tightening degree and mechanical strength. 5. The construction of large diameter pipes (≥ 600mm) should be equipped with PP wheel, squeeze firmly push the baking: 6. Contraction is completed, along with shrink sleeves Weihuo circumferential edge of baking, until the melt overflow even better, the contraction is completed. 7. Quality checks, press the SY / T 0413-2002 Standard Appendix G, and conducted the determination of peel strength. Qingdao Xin source of pipeline corrosion insulation United Engineering Co., Ltd. Qingdao good exchange heat pipe Manufacturing Co., Ltd. Yan Zhixian: Website: |
Admin>>>
You are the 8671 visitor
Copyright © GuangDong ICP No. 10089450, Qingdao Xin source of pipeline corrosion insulation United Engineering Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 8671 visitor
Copyright © GuangDong ICP No. 10089450, Qingdao Xin source of pipeline corrosion insulation United Engineering Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility